These simple and brief guidelines are designed for newcomers and experienced amateurs alike. By no means do they cover all aspects of repeater use, but are designed to enhance the friendly, efficient and professional sounding communications between amateurs enjoying the experience that is ‘Repeater QSO’s’.
Initiating Calls:
There are two main ways a QSO via the repeater can be started. Firstly, to simply put a call through the repeater stating your callsign and announce you are ‘monitoring’ or ‘listening’, for instance “G8CAB monitoring” and wait for a response. There is no need to repeat this call in the same manner as a CQ call on HF, once every few minutes is sufficient. If you are unfortunate to get no response then that probably means that no one is actually listening. Don’t be dismayed, sometimes there is nobody listening!
The second way to initiate a QSO is a direct call, such as “G0ABC, this is M1CBA calling”. In this scenario M1CBA is trying to contact G0ABC specifically. This kind of call is not generally a call anyone other than G0ABC should respond to. However, after sufficient opportunity for G0ABC to respond, if they do not return then a call back to M1CBA from yourself, along the lines of “M1CBA, this is G8CAB calling”, may initiate a QSO.
Joining An Existing Call:
If there is a QSO already happening on the repeater – LISTEN! Well, listen first before trying to join, and then only join if you can participate in the conversation. The correct way to join is to wait for the courtesy tone of the repeater after someone’s over and announce your presence by stating your callsign. The station next in line will acknowledge you and fetch you into the group. This is where the importance of listening comes into play. You can choose the right moment to break in so that you can give your input to the right person without disturbing the order of the group and pass it to the station next in line.
Making A Direct Call When A QSO Is In Progress:
There may be a time when you have made arrangements to call another station or there is an important call you need to make, but there is already a QSO on the repeater. It is not the end of the world, nor do you have to wait until the existing QSO is finished. Amateur radio enthusiasts are in general a nice bunch of people that will allow you a few moments to make your call. Once again, listen and choose your moment to interrupt after hearing the courtesy tone. The word ‘break’ is normally used for this purpose; the next station should acknowledge your presence and ask you to come in. At this point you should identify yourself, explain that you need to make a call and continue to do so. It should go something like this:
“Break, Break”
“Break station acknowledged, this is G0ABC go ahead”
“G0ABC, this is G8CAB making a call, sorry to interrupt. M3BAC, this is G8CAB calling”
Should M3BAC answer, then make the contact as brief as possible and arrange to QSY to a simplex channel if you need to hold a QSO, not forgetting to thank the other stations for allowing you to interrupt. If M3BAC does not respond, then make sure you acknowledge the fact that the existing stations have allowed you to interrupt to no avail, thank them as manners cost nothing and sign to allow them to continue.
Group QSO’s On The Repeater:
Often there are more than two stations holding a QSO on the repeater. This ‘group’ will have a direction it is travelling with respect of who is to take an over next. When involved in a ‘group’, it is always courteous to maintain the order and direction as this enables everybody to have their fair share of overs, prevents doubling and enables stations that are waiting to join to pick their moment to interrupt. Make yourself aware of who is going to pass the key to you and where you have to pass it onto.
Again, listening first before joining pays dividends! During these QSO’s just because you are always passing the key to the same station doesn’t mean you cannot ask other stations questions or provide information to them. You will just have to wait until their turn on the key for the response! Breaking the order of the group is not a crime, but it does start to cause confusion if the order is not regained at the earliest opportunity. So if you need to speak to a station within the group before they clear then it is acceptable to direct the key to them before they do sign, but they should revert the key back to where it should have been so the group can continue.
General:
In the same manner as you would during a simplex QSO, you must identify your station at regular intervals. This is also a condition of your licence. There is no requirement to give your callsign every over whilst on the repeater, but this does make it easier for listeners. Also, remember when you were training to become a qualified amateur, when you direct the key or make a call, your callsign comes second.
If you are in a QSO, whether it is with one station or within a group, it is not necessary for you to identify the station which has passed you the key, just yourself, e.g. “M3BAC returning…“. Try avoiding constant use of phonetics unless there is a misunderstanding of callsigns or important information. When phonetics is used, stick to the standard phonetic alphabet and not the European/USA/CB version that is creeping across the HF bands.
With the mention of CB, try to use plain English, the kind you would expect to hear on prime time television before the water shed. Avoid ‘radio-ish’ many Hams graduated from CB, both have their own language style, the difference being you have had to learn and qualify to call yourself a competent Amateur Radio Licensee. Amateurs have ‘names’, they ‘listen’ or ‘monitor’, they ask for ‘signal reports’ and they ‘sign’ at the end of QSO’s. Unlike CBers who have ‘handles’, ‘sit on the side’, get ‘rig checks’ and ‘back on out’ when they have finished chatting! You worked hard to pass your licence – be proud of it and comply with its protocols.
Malicious Interference:
In the event of malicious interference on the repeater, such as rude comments, ‘jamming’, use of touch tones during other stations QSO’s, etc. DO NOT ACKNOWLEDGE IT! As far as is possible, continue your QSO in a normal manner. If the interference becomes too great, where it is impossible to carry on, simply end the QSO as you would normally. Try and avoid any kind of conflict on the repeater. If you find yourself in amongst such a debate which is becoming heated for some reason, then just simply change the subject. If this does not work, sign off and go to a different frequency and let the situation cool off. If you experience this type of behaviour on the repeater, make detailed notes, such as time, date, nature of interference, callsigns if available and if at all possible a signal report on the repeater’s input frequency.
These details should be made known to the repeater keeper, as this type of information can be used to form a dossier against the culprits. The worst course of action you could take is to engage the station who is causing the problem – this only encourages them to continue, as they are getting the desired result, a reaction.
Output Power:
Use the lowest, comfortable amount of output power possible to ensure that your overs are readable. Doing this ensures that the station(s) you are talking to don’t need to struggle to understand you as you fail to open the squelch of the repeater. Also it means you are not causing undue interference to nearby stations and other repeaters on similar frequencies by running 100+ Watts!
It is easy to tell a station that is running insufficient power to operate the repeater correctly – their signal carries an excessive amount of noise. This can be demonstrated by using the repeater with a handheld with the standard antenna and then attaching an external antenna. Even though the actual output power is the same, because a more efficient station is being used the effective power is greater.
Do not be scared of informing fellow amateurs of a noisy or difficult to understand signal, I for one appreciate it as it helps me to discover if something is going wrong!
Considering the potential problems of accessing the repeater with poor signals, mobile and portable stations take preference over fixed stations as they may only be in range for a relatively short period, and it is not so easy for them to try alternatives to access the repeater or to hold a QSO.
Can I work The Repeater?
Many unidentified stations can be heard ‘keying’ the repeater to test their ability in operating it. This is known as ‘kerchunking’ and is in breach of your licence! If you want to know if you can work the repeater you have two options. Firstly you can just test, something like “M3BAC test” or “M3BAC checking access”. This will fire the repeater into life and enable you to hear the courtesy tone unless your signal is not sufficient then you may get just a carrier in return or at worst case, nothing at all. The second way is to ask for a report, “M3BAC, can someone give me a signal report please?” The reply should be in the normal, recognised RST format, (obviously without the tone (T) figure), but this only tells you the quality of the signal being retransmitted by the repeater. So, if the station that responded to you is in a poor position to the repeater the signal may not be as good as you expected. Stations more familiar with repeaters and repeater use may give you an additional signal report, one that is your signal as heard on the input frequency. This gives you a better idea of the quality of your signal, but may also be unsatisfactory as they may be too far away for a good quality simplex QSO, which is why repeaters exist in the first place, (enabling stations to hold QSO’s over greater distances than they could simplex due to terrain, obstacles, low power, etc.). Fixed stations are discouraged to use repeaters as test beds and targets for their radio experiments as this limits other stations from using the repeater properly. It goes without saying that you should never be so rude as to interrupt an ongoing QSO just for a signal report!
I cannot emphasise enough the importance of listening before calling on the repeater. The repeater has many users from all walks of life, young, old, male, female, some just listen and others can be found talking on there all day long! Be careful with the topics you discuss – if you wouldn’t discuss it in a bus queue, then don’t discuss it over the air, you never know who is listening! Remember, allow others to join in, they may be able to help you or have some useful knowledge to share. Leave them plenty of opportunity between overs to make their presence known, and make sure they have their fair share of overs in the group.
Finally, in no way do I confess to being an expert operator, nor do I cover every eventuality in this document. This is just a piece of literature about some of the more common areas of failure on repeaters, which may be of some use to people new and experienced in the hobby. There is no substitute for experience, but don’t follow others bad habits! I am sure we can all spot ourselves in the words above.
